HOME > Products > Edge Banding Machine Compact Series
Edge Banding Machine Compact Series

COMPACT-CM


APPLICATION

 

  • Also for gluing edges of PVC, melamine or veneer on straight, round or shaped panel with hot melt glue.
  • However, it is enriched for edging ABS or solid lipping from 0.4 to 3 mm thickness in strip.

APPLICATION


  • ​​Fill up hot melt glue into the glue pot . Max 3kgs.
  • Set up temperature at about 180ºC by the indicator of electronic temperature regulator.
  • Preset the length of the edge by digital millimeter indicator.To insert the edge into feeding line on table top.
  • Turn on the main switch of power supply.Glue to be then heated and melted in about 10 minutes.
  • Reset temperature at 160ºC Max and 140ºC Min on temperature regulator fo energy saving.
  • Turn on the switch of feed motor only if glue is fully melted in the glue pot. Check it first.
  • To hold working panel by hands to approach the fence and stand by at the front of pressure roller.
  • Then press pedal switch by foot. Push and move panel onto pressure roller as soon as edge feeding out.

TECHNICAL

MODELCOMPACT-CM
TABLE AREAmm1100x800
PANEL LENGTHmm100 AND UP
PANEL WIDTHmm65 AND UP
PANEL THICKNESSmm10-50
EDGING THICKNESSmm0.4-3
GLUE PIT CAPACITYkg3
HEATING ELEMENTkw1.8(2.4)
FEED SPEEDm.p.m.5/15/20
POWER REQUIREDkw(hp)0.75(1)
Net weightkg350
Gross weightkg450
Machine sizemm1520x800x1000
Packing sizemm1220x910x1190